
Johnson C. Smith University
100 Beatties Ford Rd
Charlotte, NC 28216
United States
Click below to read the article.
Johnson C. Smith University unveils new entrance with Golden Bull mascot ↗
100 Beatties Ford Rd
Charlotte, NC 28216
United States
Click below to read the article.
Johnson C. Smith University unveils new entrance with Golden Bull mascot ↗
346 University Drive
Monticello, AR 71656
United States
Click below to read the project details.
UAM Athletics Unveils New Boll Weevil Statues ↗
4130 Adventure Trail
Rapid City, SD 57702
United States

3100 Shore Drive
Virginia Beach, VA 23451
United States
Material: Stainless steel
Surface Finish: Mirror-polished sculptural body
Size: 96" H
A Bold Shape, with Practical Details in Mind
This sculpture was one of two pieces selected for a project in West Virginia. Its flowing, layered form gives it a strong visual presence, with broad curves that fold outward and back around the center. Open spaces between the elements keep the composition airy, while the mirror-polished stainless steel reflects light and color across the surface.
Alongside the appearance, the client raised an important practical priority: stability. We discussed the anchoring options with the client. That exchange helped ensure the stainless steel sculpture turned out just as the client envisioned.
Reviewing the Finished Work
The response was encouraging: the client said the sculpture looked great and expressed excitement about the two designs they had chosen. After reviewing both sculptures, the client confirmed they were pleased with the results.
This project brought together the visual details of a contemporary sculpture with the practical planning needed for delivery and later installation.
Material: Stainless steel
Surface Finish: Mirror polished
Size: 96" H
A Balanced Form, with Delivery in Mind
This stacked pebble sculpture pairs smooth, rounded forms with a striking mirror finish. A broad lower pebble anchors the composition visually, while an upright oval and smaller horizontal forms create the appearance of carefully balanced stones.
During discussions with the client’s team, overall height became an important planning detail. Our original quote was based on an 8' sculpture—the maximum height we could transport as one complete piece for this shipment. A taller version would have required fabrication in sections and assembly on site, adding complexity and cost. We recommended keeping the design at 96 inches so it could retain its tall proportions while allowing shipment as a complete piece.
The Finished Work
The completed sculpture brings together generous curves and contrasting proportions.
For this project, planning the scale meant considering both the artwork’s appearance and how it would reach its destination. Addressing the shipping limits early helped keep the design and delivery approach aligned.
Material: Stainless steel
Surface Finish: Mirror-polished body with a black-painted stainless steel base
Size: 96" H; Base Dimensions: 31.4" W × 31.4" D × 3" H
Choosing the Finish and Base
For this outdoor residential project in California, the client considered several designs before choosing the PSSS-092 coral-inspired sculpture at 96 inches tall. Its irregular outline, rounded openings, and flowing contours offered a distinctive organic shape, while the bright stainless steel finish gave it a contemporary appearance.
The client wanted a low-profile base approximately 2–3" high. We updated the drawing with a 3" stainless steel base and recommended a black finish to contrast with the reflective sculpture above.
Working Through the Mounting Details
The client’s contractor would prepare a concrete foundation with a tiled surface, so the base dimensions and mounting arrangement were important parts of the discussion.
One question concerned how the bolts would pass through the 3-inch base and tile into the concrete. We clarified that the anchors would pass through pre-drilled mounting plates around the base, rather than through the full height of the raised base itself. Walking through this detail helped the client understand the fixing arrangement and gave their contractor a clearer plan for preparing the site.
Reviewing the Finished Work
After receiving the completed photos, the client responded, “Looks great.” The finished sculpture combines flowing, reflective contours with a simple black foundation.
Material: Stainless steel
Size: 84" H
Setting: Outdoor amenity deck
Refining the Base with the Project Team
We worked with the interior design, architectural, and structural teams to review the mounting plate, bolt-hole positions, and connection between the sculpture and its circular plinth.
After a coordination meeting, we provided detailed drawings and reference videos explaining the connection. The revised approach used six fixing points with defined spacing for accurate positioning. Leveling shims were also discussed to accommodate the site’s slope.
When the project team supplied an updated support detail, we adjusted the anchor lengths to suit it and avoid extending into the insulation layer below.
Bringing the Details Together
During the review, we highlighted that the bottom fixing plate was wider than the visible plinth. The sculpture needed to be positioned before the surrounding decking was completed, so the team could conceal the lower connection as intended.
The design team approved the shop drawings, with only an administrative change requested. The completed workshop photo shows the polished sculpture before installation—a finished piece developed alongside the site details, with careful attention to how the artwork would meet the deck.
Material: Stainless steel
Surface Finish: Matte fluorocarbon paint
Color: RAL 5005 — Signal Blue
Size: 84"
Choosing the Right Scale for the Space
This abstract sculpture was created for a California desert home, with its placement considered from both inside and outside the house. The client shared photos showing the view through the glass doors toward a dedicated outdoor pad slightly larger than five feet square.
We prepared renderings to help the client visualize the sculpture in that setting and discussed several height options. After reviewing the space with their design team, the client selected an 84-inch height. The tall, sweeping form gives the piece a clear presence, while its open center allows the surroundings to remain visible.
The designer also requested mounting flanges on two sides rather than the initially proposed angle brackets. We revised the drawing to reflect that preference.
Finding the Right Blue and Sheen
Color was a central part of this project. After an on-site meeting, the client confirmed RAL 5005, Signal Blue, and asked about sheen options. With the strong desert sun in mind, they specifically wanted to avoid a glossy finish.
We provided a rendering showing the sculpture in blue with a matte surface. The client liked the preview and confirmed that matte was their preferred finish.
The Finished Work
The completed sculpture pairs a rich blue surface with a simple black rectangular base. Two tapered curves rise around an elongated opening, creating a silhouette that feels both bold and light. From the height selection to the custom mounting details and specified blue finish, the piece was developed around the client’s space and their designer’s preferences.
Material: Stainless steel
Surface Finish: Electroplated brushed bronze
Size: 84" overall height, including base
Project Role: Centerpiece for a property ceremony
A Centerpiece with a Musical Connection
This treble clef sculpture was commissioned for a residential property in New York referred to by the client as “Recording House.” According to the client, the site once housed a Columbia Broadcasting recording studio, and the sculpture was intended to commemorate that history.
The client described the piece as a centerpiece and highlight of the property’s ceremony. That purpose gives the musical symbol a connection to the project: a recognizable reminder of the recording studio that is now gone.
Refining the Scale and Base
We prepared renderings showing the electroplated brushed bronze finish with both square and round base options. The client selected the round base, which complements the loops and flowing curves of the treble clef.
After initially considering a 96-inch version, the client reviewed the dimensional information and decided that an 84-inch overall height would better suit the location. We clarified that the height included the base and supplied an updated rendering showing the round base diameter, helping them assess the complete proportions before moving forward.
The Finished Work
The completed sculpture combines a tall musical silhouette with a warm brushed bronze finish over stainless steel. Soft metallic highlights follow the upper loop, central spiral, and curved lower stem, while the matching circular base brings the composition together.
Created to serve as a ceremonial focal point, the piece connects the property’s new chapter with the musical history the client wanted to preserve.
Material: Stainless steel
Surface Finish: Gloss finish over a custom color gradient
Color: Warm coral-orange transitioning into pink and deep magenta
Size: 72" H
Custom Details: Added internal weight and floor-anchoring brackets
Choosing the Size and Stability Details
This curved stainless steel sculpture was commissioned for a project at a working ranch in Texas. We provided drawings for both 60-inch and 72-inch versions, allowing the client to compare their proportions before selecting the taller piece.
Stability was an important part of the discussion. We explained two options: adding internal weight or providing brackets for anchoring to the floor. The client requested both, combining additional weight with the option to secure the sculpture in place. The estimated weight for the 72-inch version with added ballast was approximately 200 lbs.
Approving the Color Transition
The client wanted the color effect shown on the website, so we prepared a sample for review before completing the finish. The sample showed a gradual transition from lighter tones at the top to deeper tones toward the bottom.
After reviewing it, the client approved the color direction. The finished palette moves from warm coral-orange through pink into rich magenta, following the sculpture’s twisting vertical form.
We then shared photos taken both in direct sunlight and without direct sunlight, helping the client see how the color appeared under different lighting conditions before the final gloss finish was applied.
Reviewing the Finished Surface
Once the gloss finish had dried, we sent updated photos for final review. The reflective surface brings out the flowing contours, with highlights tracing the broad curves and narrower turns.
The client responded that the sculpture looked great and said they were looking forward to seeing it in person. The completed piece brings together the approved gradient, a glossy surface, and the stability details requested during the design process.
Material: Stainless steel
Surface Finish: Brushed steel-gray finish with a clear gloss coating
Size: 96" H
Destination: Texas, USA
Setting: Residential front courtyard
Finding the Right Proportions for the Courtyard
The client and their spouse selected this geometric deer sculpture for the front courtyard of their Texas home. Its angular body, slender legs, and branching antlers give the familiar animal form a contemporary character. Each flat facet catches light differently, creating contrast across the steel-gray surface.
Before confirming the order, the client reviewed a drawing of the 96-inch version to understand how it would fit the space. We explained that the overall length was approximately half the height, helping clarify the proportions beyond the product photographs. The client confirmed that the size worked for their courtyard and later returned the signed production drawing.
Choosing the Finish Through Physical Samples
The couple initially preferred an brushed steel-gray appearance, but wanted to see the material before making their final choice. We prepared two physical finish samples for comparison. After reviewing them, the client selected sample No. 2 as their preferred reference.
The finish remained part of the conversation during production. When we shared photographs before applying the final gloss coating, the client approved the shape and asked whether the surface would become darker afterward. We clarified that the coating was transparent and that the finished appearance would remain consistent with the approved sample.
Planning Around the Existing Tile Surface
The intended location was an outdoor tiled courtyard. The client wanted to know whether securing the sculpture would require drilling into the tile, so we discussed adding internal weight as a freestanding option. They also shared a photograph of the placement area, which helped us discuss the importance of a level surface and avoiding exposure to strong winds.
To help with placing the large sculpture, the client added our paid white glove service. This included unloading, moving the sculpture to the designated courtyard location, unpacking it, and removing the packaging materials.
After the client approved the shape and color, we applied the clear gloss coating and shared a final video. The client responded that it “Wonderful! ”
Material: Cast bronze
Size: 17.4" H/ 58"H
Destination: Arkansas, USA
Turning a Mascot Reference into a Sculpture
This custom boll weevil sculpture began with a university client’s mascot images. The goal was to create a fully three-dimensional figure that closely captured the original character, including its expressive face, curved antennae, and energetic pose.
The project discussions covered both a larger outdoor sculpture and a smaller 18-inch version. For the smaller piece shown here, the client supplied photographs and measurements of the existing display support so we could consider the connection alongside the sculpture itself.
Refining the Face and Pose
Much of the design conversation focused on details that made the mascot recognizable. After reviewing the drawings with their athletics and campus design teams, the client requested smoother arms and legs, smaller-looking joints, and the removal of lines across the torso.
The face received particular attention. The client wanted a more curved jawline, greater separation between the jaw and mouth, and a smoother nose tip. During later reviews, they also asked for slimmer, slightly lifted cheeks to bring the expression closer to their mascot reference.
Hand placement mattered, too. The client requested that the front hand turn inward and the rear hand sit closer to the body. These specific comments guided successive drawing revisions.
Choosing the Bronze Appearance and Support
The client preferred the warm bronze color of another sculpture in our collection over the initially discussed black patina. The finished piece shown here combines golden-brown highlights with darker areas around the eyes, mouth, and body contours, giving definition to the character’s expression.
For the smaller sculpture, the client requested a single central support beneath the body. The finished photograph shows that support connecting the figure to a square mounting plate, keeping the legs and animated pose clearly visible.
The Completed Sculptures
The sculptures have now been completed, bringing the mascot references and design discussions into finished bronze pieces. Photos of the completed works can also be seen on social media, offering a closer look at their expressions, poses, and warm bronze finish.
Material: Bronze
Surface Finish: Green patina with brown and warm metallic accents
Size: 60" H/15" H version
Destination: Ireland
Creating the Design in Two Sizes
The client commissioned this figurative composition in two sizes: a 15-inch piece for New York and a 60-inch version for Ireland. The closely grouped figures, worn clothing, bare feet, and expressive faces give the sculpture a solemn presence. Folded fabric and belongings held close to the body add detail throughout the composition.
The smaller sculpture was completed first, giving the client a chance to review the finish before we completed the larger work.
Refining the Color and Patina
When reviewing the 15" piece, the client asked us to reduce the coverage and brightness of the green patina so more of the brown tones would remain visible.
We adjusted the finish and shared new photographs. The client described the revised mix of browns and patina as “just perfect” and asked us to use it as the benchmark for the 60" sculpture.
That feedback gave our team a clear reference as the larger piece moved through casting, welding, polishing, and surface finishing. We also shared progress photographs so the client could follow its development.
Making Every Letter Count
The inscription was particularly important to the client. During the smaller sculpture’s review, we noticed that “MÓR” was missing the accent above the “Ó”.
We corrected the lettering and provided updated photographs and a video for approval. After receiving the 15-inch sculpture, the client told us they were “absolutely delighted with it.”
For the larger version, they reminded us to include the same correct inscription on the front of the base. The completed 60" sculpture shown here carries that lettering, and we shared finished photographs and a short video for their review.
Material: Brass
Size: 72" L
Setting: Outdoor brick wall in a residential garden
Custom Details: Dimensional relief with a flat back and rear mounting rods
From a Simple Silhouette to a Detailed Mermaid
The client wanted a mermaid inspired by their Norfolk Mermaid reference to become a centerpiece in their backyard. Their initial idea was a simple silhouette, approximately six feet long, with a flat back for mounting on a garden wall.
We discussed whether they preferred a completely flat design or a more dimensional sculpture, then prepared a rendering based on their reference. The response helped shape the project: the client and their spouse especially liked the added detail, which went beyond the silhouette they had originally imagined.
The resulting design features flowing hair, individually defined scales, a curved tail, and outstretched arms. These raised details give the sculpture depth and create shadows across its warm metallic surface.
Refining the Hands and Planning the Wall Connection
After reviewing the rendering, the client asked about the sculpture’s height, how far it would project from the wall, and its mounting structure. They also shared a photograph of the intended brick wall, helping us prepare drawings showing the proportions and back construction.
We proposed a sealed back with a galvanized steel plate and rear threaded rods for mounting into prepared holes in the wall.
The hands received a further design refinement before production. The client approved the updated details.
Choosing the Material and Reviewing the Finished Work
To work within the client’s budget, we recommended brass as an alternative to bronze. They also asked how the material would look after spending several years outdoors. We shared a photograph of an older outdoor brass sculpture to illustrate how patina can develop over time.
Once the mermaid was completed, the client reviewed its finished appearance and replied: “Sculpture looks great. My wife and I love it!”
Material: Brass
Surface Finish: Dark brown bronze-toned finish
Size: 60"H
Custom Details: Raised, inward-curving tail, textured fur, and a round base
Mounting Plan: Angle brackets and expansion bolts for concrete anchoring
Developing the Pose from the Client’s Reference
The client wanted a substantial beaver sculpture and initially discussed a height in the five- to six-foot range, with the body proportioned to match. After reviewing two design options, they selected the second and requested one distinctive change: a raised tail that curved inward.
We prepared a rendering incorporating that request. The client replied, “Yes that looks great,”. The completed sculpture features an upright stance, front paws held near the chest, and a broad tail rising behind the body. Layered fur texture across the face, chest, and sides gives the figure depth, while the dark brown finish highlights the raised details.
Adjusting the Base While Preserving the Design
As we developed the drawing and quotation, we reviewed the base shown in the initial rendering. Reproducing it at that size would have required additional material and significantly increased the weight.
We adjusted the base dimensions to help keep the project cost more manageable while maintaining the sculpture’s structure and overall appearance. The finished piece stands on a round base that follows the shape of the composition without drawing attention away from the beaver.
Planning a Secure Connection to Concrete
The client also wanted the sculpture securely anchored to help deter removal. They confirmed that concrete anchors or a new footing could be accommodated at the intended location.
We proposed adding angle brackets to the base and supplying expansion bolts for the concrete connection. The dimension drawing was updated to show those brackets, and we shared an installation reference video to explain the approach.
After the client returned the signed drawing, production proceeded. Once the sculpture was completed, we sent finished photographs for their review.
Material: Bronze
Size: 84" H
Custom Details: Reduced-width integrated base and concrete anchoring
Additional Service: White glove service
Adapting the Base to the Property
The clients selected this standing bear sculpture for their mountain home in California. Its upright pose, detailed fur, and rock-shaped base give it a strong presence suited to the outdoor setting.
After reviewing the 84" drawing, they confirmed that the sculpture’s dimensions worked for their chosen location. They also shared photographs and measurements of the concrete placement area and the steps leading up to it.
Those photographs revealed an important detail: the route passed through an opening approximately three feet wide. We discussed reducing the base or using lifting equipment to reach the installation area. The clients preferred the smaller base, so we prepared a revised drawing with its width reduced to 31.7" while retaining the bear’s size and pose.
Clarifying the Construction and Installation
The clients initially thought the base could be moved separately or turned vertically to pass through the opening. We explained that the rock-shaped base was made of bronze and integrated with the sculpture.
That clarification helped them confirm the revised design. For the flat concrete location, we recommended angle brackets and expansion bolts, supported by reference photographs and an installation video.
The clients also requested white glove service to help with moving the sculpture into position and installation. Planning these details alongside the base revision helped address the property’s access requirements before production began.
Reviewing the Finish in Different Lighting
During production, the clients asked whether a reference photograph showed the color they would receive. We explained that sunlight brings out the bronze tones and highlights, while the same finish can appear much darker—almost black—without direct sunlight.
We shared progress photographs during production, followed by finished photographs for the clients’ review and approval. After reviewing the finished sculpture, the clients were very pleased with the final result.
Material: Cast bronze
Overall Size: 64.4" H
Custom Details: Taller round base, white dove, and welded anchoring brackets
Adjusting the Base Without Reducing the Figure
The clients selected this girl holding a dove sculpture and wanted to customize its proportions. The flowing dress, softly modeled face, and raised hand create a graceful composition, while the white dove provides a distinct contrast against the bronze.
During the drawing review, they requested a wider, taller base. One detail was especially important: increasing the base height should not make the girl smaller. They asked us to retain the original 56.4-inch figure and pair it with an 8-inch-high, 20-inch-diameter base, bringing the overall height to 64.4 inches.
We revised the drawing to reflect those dimensions. The clients then returned the signed approval and requested angle brackets welded beneath the base so they could secure the sculpture to their concrete slab.
Choosing the Custom Finish and White Dove
The clients reviewed physical finish samples before ordering. After receiving the custom swatch, they told us they loved it and were ready to proceed with the revised dimensions.
We also confirmed the dove’s color separately. They chose white, matching the website photograph, rather than having it finished in the same bronze tones as the girl. That choice keeps the bird visually prominent above the figure’s raised hand.
Reviewing the Final Surface Together
When the first completed photographs arrived, the clients felt the surface looked flatter and more matte than the bronze appearance they expected. We explained that the final wax had not yet been applied and would add a richer, more natural sheen without substantially changing the underlying color.
They also asked about the material and construction. We confirmed that the sculpture was real bronze and explained the traditional lost-wax casting process.
After waxing, we shared updated photographs and a video to show the finish more clearly. The clients approved the result, replying, “This looks like what we were hoping for.”
Material: Bronze
Surface Finish: Custom black finish
Size: 36" H
Choosing the Sculpture and Color Together
The client initially considered two abstract designs for a fountain project, with a preferred sculpture height of three to four feet. After reviewing the options, they selected the 36-inch version of the PSB-043.
Color was an important part of the decision. The client shared a photograph of the fountain and asked whether black would be a good match. We prepared a black rendering, then created a mockup showing the sculpture positioned on top of the correct fountain.
Their response was enthusiastic: “This looks amazing!” They asked us to proceed with that exact sculpture and color.
Designing a Connection That Would Stay Out of Sight
The mounting arrangement became the main customization. After reviewing our drawing with the fountain contractor, the project superintendent requested threaded inserts beneath the sculpture’s base. This would allow the team to bolt it from underneath, keeping fasteners hidden from the sides.
The intended effect was for the sculpture to appear to float on the water. To explain the arrangement, the contractor supplied marked-up drawings and fountain construction details.
Material: Bronze
Surface Finish: Dark patina with mottled green accents
Size: 96" H
Custom Details: Mmodified base corner, and concrete anchoring brackets
Developing the Sculpture Around the Landscape
This project brought together a contemporary bronze sculpture and a landscape area that was still under construction. The client’s project manager supplied site photographs.
We prepared dimensioned drawings and renderings to help the team review the sculpture in context.
Modifying the Base to Fit the Planter
The base required the most detailed collaboration. The existing planter was wider at the front and narrower at the back, so a standard rectangular footprint would not fit as intended.
After supplying additional measurements, the project manager clarified the requested shape: retain the 45.2" × 57.9" rectangular footprint, but remove part of the northeast corner to accommodate the planter. We then worked through the sculpture’s facing direction and the exact corner to be modified.
Coordinating the Foundation and Final Approval
For the concrete connection, we provided drawings showing the anchoring brackets and expansion bolts, along with photographs and an installation reference video. These details helped the project manager coordinate with the installation contractor.
Once the board approved the design, the project manager returned the signed shop drawing and authorized production. The completed sculpture shown here reflects a design process shaped by the planter’s dimensions, the intended viewing direction, and the foundation requirements.
Material: White marble
Surface Finish: Smooth marble surface with finely carved details
Project Location: California, United States
Refining the Expressions, Wings, and Drapery
This Cupid and Psyche sculpture was commissioned for a private property in California, where the clients had prepared a round concrete pedestal surrounded by plants and flowers. The embracing figures, open wings, and flowing fabric would make the sculpture the central feature of the garden.
The clients took an active role in refining the design. They shared reference images for Cupid’s face while asking us to preserve Psyche’s peaceful expression, with her lips closed and her head resting gently against him.
They also requested the addition of doves near the bottom of the sculpture. We incorporated them into the composition alongside the flowing drapery, then shared the updated design for review.
The drapery received particular attention. The clients wanted the fabric around Psyche to follow her form without looking bulky or overly revealing. We refined the folds and adjusted the contours for a more natural appearance. After reviewing additional views, they also approved the distinct wing designs.
A Base Designed for a Personal Purpose
Beyond its appearance, the sculpture needed a carefully customized pedestal. The clients requested two discreet compartments within the marble base for future memorial use, with matching covers that would blend into the surrounding stone.
We incorporated doors that could remain accessible until the clients were ready to close them permanently. They then asked for an additional way to conceal the openings and cut lines. Our team prepared two matching marble panels, sized to cover the sides of the base after the doors were sealed.
The clients confirmed that this solution was exactly what they had envisioned.
Reviewing the Finished Marble Sculpture
During carving, we shared a production video so the clients could see their design taking shape. When the finished photographs arrived, they described the sculpture as beautiful and especially appreciated seeing the composition realized in marble.
They also asked us to pass their thanks to everyone involved in its creation. The completed work brought together carefully reviewed artistic details and a discreet, deeply personal feature within the base.
Material: Beige marble figure with dark gray bluestone drapery
Size: 36" H
Project Location: Indiana, United States
Choosing the Stone for the Figure and Drapery
This Dancing Girl Sculpture PSM-015 was commissioned for a dining room in a private Indiana home. The client liked the dancer’s arched pose, flowing hair, and raised arm, but wanted to personalize the stone combination.
Our first discussion focused on the flowing “silk” behind the dancer. We explained that this element was also carved from natural stone and could be customized separately from the figure. To help the client compare options, our designer prepared renderings pairing a beige dancer with different stone colors.
The client preferred a cooler blue-gray tone. After reviewing the samples and discussing how dark the stone would appear, he selected dark gray bluestone for the drapery.
Reviewing the Model and Natural Veining
The client’s main priority was a smooth figure with as little visible veining as possible. We shared photographs of previous stone sculptures and explained that patterns could emerge as carving revealed deeper layers of the marble. Our team selected stone with lighter markings while preserving the natural character of the material.
A Finished Piece the Client Was Happy With
When we shared the completed photographs, the client approved the sculpture and said it looked great.
We also arranged paid white glove service for placement in the dining room, reviewing the entrance and access route beforehand. After installation, the client shared photographs, confirmed that the sculpture looked great in place, and thanked our team for helping make the order exactly what he wanted.
Material: Natural white marble
Size: 75.5" H
Project Location: Nebraska, United States
Personalizing the Angel with Lily Flowers
This praying angel sculpture was commissioned for a garden project at a healthcare facility in Nebraska. With folded hands, a gently lowered gaze, and long feathered wings, the design offered a calm presence for the planned setting.
The client liked the original sculpture but asked whether the roses around its feet could be replaced with lilies. Although this was a small part of the overall design, it was a detail they specifically wanted to personalize.
We updated the drawing to show lily flowers around the bottom of the angel and shared it for review. In the finished marble, the open petals sit among the folds of the robe, adding detail without drawing attention away from the figure’s peaceful expression.
Finding the Right Pedestal
The garden contractor recommended placing the angel on an additional pedestal. The team wanted to understand how different pedestal shapes would work with the sculpture’s existing polygonal base.
We prepared dimension drawings showing three options and provided estimated weights for both the angel and each pedestal. This gave the contractor practical information for planning the concrete foundation while allowing the client to compare the proportions.
The completed sculpture features a square marble pedestal with recessed decorative panels, creating a clear transition between the detailed angel above and the garden foundation below.
Planning the Connections Before Carving
The contractor also asked how the sculpture would connect to the pedestal and how the pedestal would attach to the concrete foundation.
We explained the proposed connections using matching drilled holes, supplied threaded rods, and marble adhesive. An installation video helped illustrate the arrangement, so the team could plan the site work before the sculpture was ready.
After receiving confirmation, we moved into production. Once carving was complete, we sent finished photographs for the client’s review, showing the customized lilies, detailed wings, and marble pedestal together.
Material: Solid natural white marble
Size: 72" H overall, including the pedestal
Project Location: New Mexico, United States
Choosing the Angel and Getting the Proportions Right
This kneeling angel sculpture was commissioned as a personal memorial for a client in New Mexico. The client initially considered a standing angel before choosing the Kneeling Angel PSM-044 with a matching marble pedestal.
One important detail was the overall height. The client wanted the sculpture and pedestal together to measure 72 inches, so we reviewed the combination as a complete piece. The pedestal needed to complement the angel’s proportions while providing space for a personal inscription.
The finished angel has joined hands, a gently bowed head, and long wings framing the kneeling figure. Carefully carved feathers and soft folds in the robe give the white marble depth and detail.
Working Through the Memorial Inscription
The client requested a short dedication with a loved one’s name and dates engraved on the front of the pedestal. We prepared a lettering preview so the wording and arrangement could be reviewed before engraving.
During this discussion, the client considered whether to include full dates or simply the years. We allowed time to settle that detail, and he approved the inscription preview alongside the signed sculpture drawing.
Keeping the inscription on the pedestal gave it its own clear space beneath the angel, making it part of the overall design.
Keeping the Lettering Natural
As the sculpture neared completion, we shared options for adding black or gold color to the engraved letters. The client asked whether the inscription could remain unpainted, preserving the natural appearance of the marble.
We provided photographs showing the lettering without added color. The recessed letters create a subtle effect through light and shadow, with the same stone surface continuing across the pedestal.
After reviewing the finished photographs, the client confirmed that he preferred the unpainted version and that no further modifications were needed.